 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| users manual target device m m m m pd178018 subseries IE-178018-NS-EM1 emulation board 1991 ? document no. u14012ej1v0um00 (1st edition) date published march 1999 n cp(k) printed in japan 1999
users manual u14012ej1v0um00 2 [memo] users manual u14012ej1v0um00 3 windows is either a registered trademark or a trademark of microsoft corporation in the united states and/or other countries. pc/at is a trademark of international business machines corporation. the information in this document is subject to change without notice. before using this document, please confirm that this is the latest version. no part of this document may be copied or reproduced in any form or by any means without the prior written consent of nec corporation. nec corporation assumes no responsibility for any errors which may appear in this document. nec corporation does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a device described herein or any other liability arising from use of such device. no license, either express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of nec corporation or of others. descriptions of circuits, software, and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. the incorporation of these circuits, software, and information in the design of the customer's equipment shall be done under the full responsibility of the customer. nec corporation assumes no responsibility for any losses incurred by the customer or third parties arising from the use of these circuits, software, and information. m7a 98. 8 users manual u14012ej1v0um00 4 regional information some information contained in this document may vary from country to country. before using any nec product in your application, piease contact the nec office in your country to obtain a list of authorized representatives and distributors. they will verify: ? device availability ? ordering information ? product release schedule ? availability of related technical literature ? development environment specifications (for example, specifications for third-party tools and components, host computers, power plugs, ac supply voltages, and so forth) ? network requirements in addition, trademarks, registered trademarks, export restrictions, and other legal issues may also vary from country to country. nec electronics inc. (u.s.) santa clara, california tel: 408-588-6000 800-366-9782 fax: 408-588-6130 800-729-9288 nec electronics (germany) gmbh duesseldorf, germany tel: 0211-65 03 02 fax: 0211-65 03 490 nec electronics (uk) ltd. milton keynes, uk tel: 01908-691-133 fax: 01908-670-290 nec electronics italiana s.r.l. milano, italy tel: 02-66 75 41 fax: 02-66 75 42 99 nec electronics (germany) gmbh benelux office eindhoven, the netherlands tel: 040-2445845 fax: 040-2444580 nec electronics (france) s.a. velizy-villacoublay, france tel: 01-30-67 58 00 fax: 01-30-67 58 99 nec electronics (france) s.a. spain office madrid, spain tel: 91-504-2787 fax: 91-504-2860 nec electronics (germany) gmbh scandinavia office taeby, sweden tel: 08-63 80 820 fax: 08-63 80 388 nec electronics hong kong ltd. hong kong tel: 2886-9318 fax: 2886-9022/9044 nec electronics hong kong ltd. seoul branch seoul, korea tel: 02-528-0303 fax: 02-528-4411 nec electronics singapore pte. ltd. united square, singapore 1130 tel: 65-253-8311 fax: 65-250-3583 nec electronics taiwan ltd. taipei, taiwan tel: 02-2719-2377 fax: 02-2719-5951 nec do brasil s.a. electron devices division rodovia presidente dutra, km 214 07210-902-guarulhos-sp brasil tel: 55-11-6465-6810 fax: 55-11-6465-6829 j99.1 users manual u14012ej1v0um00 5 introduction product overview the IE-178018-NS-EM1 is designed to be used with the ie-78k0-ns to debug the following target devices that belong to the 178k series of 8-bit single-chip microcontrollers. m pd178018 subseries: m pd178004, 178006, 178016, 178018, 178p018 target readers this manual is intended for engineers who will use the IE-178018-NS-EM1 with the ie- 78k0-ns to perform system debugging. engineers who use this manual are expected to be thoroughly familiar with the target devices functions and use methods and to be knowledgeable about debugging. organization when using the IE-178018-NS-EM1, refer to not only this manual (supplied with the ie- 178018-ns-em1) but also the manual that is supplied with the ie-78k0-ns. ie-78k0-ns IE-178018-NS-EM1 users manual users manual basic specifications general system configuration part names external interface functions installation differences between target devices and target interface circuits purpose this manuals purpose is to explain various debugging functions that can be performed when using the IE-178018-NS-EM1. users manual u14012ej1v0um00 6 terminology the meanings of certain terms used in this manual are listed below. term meaning emulation device this is a general term that refers to the device in the emulator that is used to emulate the target device. it includes the emulation cpu. emulation cpu this is the cpu block in the emulator that is used to execute user-generated programs. target device this is device (real chip) that is the target for emulation. target system this incl udes the target program and the hardware provided by the user. when defined narrowly, it includes only the hardware. ie system this refers to the combination of the ie-78k0-ns and the IE-178018-NS-EM1. conventions data significance: higher digits on the left and lower digits on the right note : footnote for item marked with note in the text caution : information requiring particular attention remark : supplementary information related documents the related documents (users manuals) indicated in this publication may include preliminary versions. however, preliminary versions are not marked as such. document number document name english japanese ie-78k0-ns to be prepared u13731j IE-178018-NS-EM1 this manual u14012j id78k0-ns integrated debugger reference windows? based u12900e u12900j m pd178018 subseries u11410e u11410j caution the documents listed above are subject to change without notice. be sure to use the latest documents when designing. users manual u14012ej1v0um00 7 contents chapter 1 general .......................................................................................................... .................11 1.1 system configuration ........................................................................................................ ....................... 12 1.2 hardware configuration...................................................................................................... ...................... 14 1.3 basic specifications........................................................................................................ .......................... 15 chapter 2 part names....................................................................................................... ..............17 2.1 parts of main unit .......................................................................................................... ............................ 18 chapter 3 installation ..................................................................................................... .............19 3.1 connection .................................................................................................................. ............................... 20 3.2 clock settings.............................................................................................................. .............................. 21 3.2.1 overview of clock settings ................................................................................................ ............. 21 3.2.2 main system clock settings................................................................................................ ............ 23 3.3 external trigger ............................................................................................................ ............................. 28 3.4 jumper settings on ie-78k0-ns............................................................................................... ................ 29 3.5 switch settings on IE-178018-NS-EM1 ......................................................................................... ........... 29 chapter 4 differences between target devices and target interface circuits ....................................................................................................................... ....31 appendix emulation probe pin assignment table ...............................................................35 users manual u14012ej1v0um00 8 list of figures figure no. title page 1-1. system configuration ............................................................................................................................ 12 1-2. basic hardware configuration ............................................................................................................... 14 2-1. IE-178018-NS-EM1 part names ............................................................................................................ 18 3-1. connection of emulation probe .............................................................................................................. 20 3-2. external circuits used as system clock oscillation circuit ....................................................................... 21 3-3. when using clock that is already mounted on emulation board .............................................................. 22 3-4. when using user-mounted clock .......................................................................................................... 22 3-5. when using an external clock ............................................................................................................... 23 3-6. connections on parts board (when using main system clock or user-mounted clock) ............................. 24 3-7. crystal oscillator (when using main system clock or user-mounted clock) .............................................. 26 3-8. pin alignment of crystal oscillator and socket ........................................................................................ 26 3-9. external trigger input position ............................................................................................................... 28 4-1. equivalent circuit 1 from emulation circuit .............................................................................................. 32 4-2. equivalent circuit 2 from emulation circuit .............................................................................................. 33 users manual u14012ej1v0um00 9 list of tables table no. title page 1-1. basic specifications ..................................................................................................... .....................................15 3-1. main system clock settings............................................................................................... ...............................23 3-2. jumper settings on ie-78k0-ns ............................................................................................ ...........................29 3-3. switch settings on IE-178018-NS-EM1...................................................................................... .......................29 a-1. np-80gc/gc-tq pin assignments............................................................................................ .......................35 users manual u14012ej1v0um00 10 [memo] users manual u14012ej1v0um00 11 chapter 1 general the IE-178018-NS-EM1 is a development tool for efficient debugging of hardware or software when using one of the following target devices that belong to the 178k series of 8-bit single-chip microcontrollers. this chapter describes the IE-178018-NS-EM1s system configuration and basic specifications. target device m pd178018 subseries chapter 1 general users manual u14012ej1v0um00 12 1.1 system configuration figure 1-1 illustrates the IE-178018-NS-EM1s system configuration. figure 1-1. system configuration fg cable ie-78k0-ns (sold separately) ns card cable mc card cable ie-70000-cd-if-a (sold separately) debugger id78k0-ns (sold separately) device file note 1 (sold separately) control software host machine pc-9800 series or ibm pc/at? compatibles interface board ie-70000-98-if-c (sold separately) interface board ie-70000-pc-if-c (sold separately) interface board ie-70000-pci-if (sold separately) or interface card interface cable interface cable (ns if cable) in-circuit emulator IE-178018-NS-EM1 (this product) ac adapter ie-70000-mc-ps-b (sold separately) emulation probe note 2 (sold separately) conversion socket/conversion adapter note 3 (sold separately) bnc probe (supplement 4) chapter 1 general users manual u14012ej1v0um00 13 notes 1. the device file is as follows, in accordance with the subseries. m sxxxxdf178018: m pd178018 subseries 2. the emulation probe is as follows, in accordance with the package. np-80gc: 80-pin plastic qfp (gc-3b9 type) np-80gc-tq: 80-pin plastic wqfn (kk-t type) the np-80gc and np-80gc-tq are products of naitou densei machidaseisakusho co., ltd. for further information, contact naitou densei machidaseisakusho co., ltd. (tel: +81-44-822-3813) 3. the conversion socket/conversion adapter are as follows, in accordance with the package. ev-9200gc-80: 80-pin plastic qfp (gc-3b9 type) tgc-080sbp: 80-pin plastic wqfn (kk-tq) the tgc-080sbp is a product of tokyo eletech corporation. for further information, contact daimaru kogyo co., ltd. tokyo electronics department (tel: +81-3-3820-7112) osaka electronics department (tel: +81-6-6244-6672) chapter 1 general users manual u14012ej1v0um00 14 1.2 hardware configuration figure 1-2 shows the IE-178018-NS-EM1s position in the basic hardware configuration. figure 1-2. basic hardware configuration ie-78k0-ns IE-178018-NS-EM1 emulation probe (sold separately) dedicated bus interface ie system host machine interface board (sold separately) 78k0 main board (g-780009 board) emulation board (this product) interface card (sold separately) chapter 1 general users manual u14012ej1v0um00 15 1.3 basic specifications the IE-178018-NS-EM1s basic specifications are listed in table 1-1. table 1-1. basic specifications parameter description target device m pd178018 subseries system clock 4.5 mhz clock supply external: input via an emulation probe from the target system internal: mounted on emulation board (4.5 mhz), or mounted on the board by the user low-voltage support v dd = 3.5 to 5.5 v (same as target device) users manual u14012ej1v0um00 16 [memo] users manual u14012ej1v0um00 17 chapter 2 part names this chapter introduces the parts of the IE-178018-NS-EM1 main unit. the packing box contains the emulation board (IE-178018-NS-EM1). if there are any missing or damaged items, please contact an nec sales representative. fill out and return the guarantee document that comes with the main unit. chapter 2 part names users manual u14012ej1v0um00 18 2.1 parts of main unit figure 2-1. IE-178018-NS-EM1 part names extout (tp9) extin (tp8) cn5 probe connector cn5 80gc user vdd led1 IE-178018-NS-EM1 main system clock mainclk d178p018agf j1 j2 j3 j4 s1 osc s3 p13p -up s4 p6p-up s2 cpu u i users manual u14012ej1v0um00 19 chapter 3 installation this chapter describes methods for connecting the IE-178018-NS-EM1 to the ie-78k0-ns, emulation probe, etc. mode setting methods are also described. chapter 3 installation users manual u14012ej1v0um00 20 3.1 connection (1) connection with ie-78k0-ns main unit see the ie-78k0-ns users manual for a description of how to connect the IE-178018-NS-EM1 to the ie-78k0- ns. (2) connection with emulation probe see the ie-78k0-ns users manual for a description of how to connect an emulation probe to the ie-178018-ns- em1. connect the emulation probe to cn5. (3) connection with bnc probe connect supplementary bnc probe to the j1 to j4 connectors on the IE-178018-NS-EM1. caution use of incorrect connection methods may damage the ie system. be sure to read the emulation probes users manual for a detailed description of the correct connection method. figure 3-1. connection of emulation probe main board (ie-78k0-ns) IE-178018-NS-EM1 emulation probe (sold separately) cn5 j1 j2 j3 j4 bnc probe (supplement) chapter 3 installation users manual u14012ej1v0um00 21 3.2 clock settings 3.2.1 overview of clock settings the main system and subsystem clocks to be used during debugging can be selected from (1) to (3) below. (1) clock that is already mounted on emulation board (2) clock that is mounted by user (3) external clock if the target system includes an internal clock, select either (1) clock that is already mounted on emulation board or (2) clock that is mounted by user. for an internal clock, the target device is connected to a resonator and the target devices internal oscillator is used. an example of the external circuit is shown in part (a) of figure 3-2. during emulation, the resonator that is mounted on the target system is not used. instead, it uses the clock that is mounted on the emulation board which is installed for the ie-78k0-ns. if the target system includes an external clock, select (3) external clock. for an external clock, a clock signal is supplied from outside of the target device and the target devices internal oscillator is not used. an example of the external circuit is shown in part (b) of figure 3-2. caution the ie system will be hung-up if the main system clock is not supplied normally. moreover, be sure to input a rectangular wave as the clock from the target. there is no need to supply a clock to x2 pin. figure 3-2. external circuits used as system clock oscillation circuit (a) internal clock (b) external clock x2 x2 target device target device external clock x1 x1 chapter 3 installation users manual u14012ej1v0um00 22 (1) clock that is already mounted on emulation board a crystal oscillator is already mounted on the emulation board. its frequency is 4.5 mhz. figure 3-3. when using clock that is already mounted on emulation board remark the clock that is supplied by the IE-178018-NS-EM1s oscillator (encircled in the figure) is used. (2) clock that is mounted by user the user is able to mount any clock supported by the set specifications on the IE-178018-NS-EM1. first mount the resonator on the parts board, then attach the parts board to the IE-178018-NS-EM1. this method is useful when using a different frequency from that of the pre-mounted clock. figure 3-4. when using user-mounted clock remark the clock that is supplied by the IE-178018-NS-EM1s resonator (encircled in the figure) is used. ie-78k0-ns IE-178018-NS-EM1 resonator (not used) mounted oscillator (to be used) emulation probe target system ie-78k0-ns IE-178018-NS-EM1 resonator (not used) target system parts board emulation probe resonator (to be used) chapter 3 installation users manual u14012ej1v0um00 23 (3) external clock an external clock connected to the target system can be used via an emulation probe. figure 3-5. when using an external clock remark the clock supplied by the target systems clock generator (encircled in the figure) is used. 3.2.2 main system clock settings table 3-1. main system clock settings IE-178018-NS-EM1 frequency of main system clock parts board (mainclk) cpu clock source selection (id) when using clock that is already mounted on emulation board 4.5 mhz oscillator used when using clock mounted by user oscillator assembled by user internal when using external clock other than 4.5 mhz oscillator not used external caution when using an external clock, open the configuration dialog when starting the integrated debugger (id78k0-ns) and select external in the area (clock) for selecting the cpus clock source (this selects the users clock). remark the IE-178018-NS-EM1s factory settings are those listed above under when using clock that is already mounted on emulation board. (1) when using clock that is already mounted on emulation board when the IE-178018-NS-EM1 is shipped, a 4.5-mhz crystal oscillator is already mounted in the ie-178018-ns- em1s mainclk socket. when using the factory-set mode settings, there is no need to make any other hardware settings. when starting the integrated debugger (id78k0-ns), open the configuration dialog box and select internal in the area (clock) for selecting the cpus clock source (this selects the emulators internal clock). ie-78k0-ns IE-178018-NS-EM1 clock generator (to be used) emulation probe target system chapter 3 installation users manual u14012ej1v0um00 24 (2) when using clock mounted by user the settings described under either (a) or (b) are required, depending on the type of clock to be used. when starting the integrated debugger (id78k0-ns), open the configuration dialog box and select internal in the area (clock) for selecting the cpus clock source (this selects the emulators internal clock). (a) when using a ceramic resonator or crystal resonator items to be prepared parts board (supplied with ie-78k0-ns) capacitor ca ceramic resonator or crystal resonator capacitor cb resistor rx solder kit chapter 3 installation users manual u14012ej1v0um00 25 <2> prepare the IE-178018-NS-EM1. <3> remove the crystal oscillator that is mounted in the IE-178018-NS-EM1s socket (the socket marked as mainclk). <4> connect the parts board (from <1> above) to the socket (mainclk) from which the crystal oscillator was removed. check the pin 1 mark to make sure the board is mounted in the correct direction. <5> make sure that the parts board mounted in the mainclk socket on the emulation board is wired as shown in figure 3-6 above. <6> install the IE-178018-NS-EM1 in the ie-78k0-ns. the above steps configure the following circuit and enable supply of the clock from the mounted resonator to the emulation device. remark the sections enclosed in broken lines indicate parts that are attached to the parts board. 1 m w 11 4 3 12 ca cb 13 2 5 10 rx 98 6 hcu04 hcu04 x vhc157 ay b hks120 x1 lv cc x1 ie-78k0-ns side (emulation device) 1 m w chapter 3 installation users manual u14012ej1v0um00 26 (b) when using a crystal oscillator items to be prepared crystal oscillator (see pinouts shown in figure 3-7) figure 3-7. crystal oscillator (when using main system clock or user-mounted clock) chapter 3 installation users manual u14012ej1v0um00 27 the above steps configure the following circuit and enable supply of the clock from the mounted resonator to the emulation device. (3) when using external clock no hardware settings are required for this situation. when starting the integrated debugger (id78k0-ns), open the configuration dialog box and select external in the area (clock) for selecting the cpus clock source (this selects the users clock). vhc157 ay b x1 v cc hks120 lv cc ie-78k0-ns side (emulation device) crystal oscillator 1 m w chapter 3 installation users manual u14012ej1v0um00 28 3.3 external trigger to set up an external trigger, connect the IE-178018-NS-EM1s check pin, extout, and extin as shown below. see the in-circuit emulator (ie-78k0-ns) users manual for descriptions of related use methods and pin characteristics. figure 3-9. external trigger input position extout extin cn5 IE-178018-NS-EM1 j1 j2 j3 j4 osc p13p -up p6p-up cpu led1 chapter 3 installation users manual u14012ej1v0um00 29 3.4 jumper settings on ie-78k0-ns when using the IE-178018-NS-EM1, set the jumpers on the ie-78k0-ns as shown below. for details of these jumper settings, refer to the ie-78k0-ns users manual. table 3-2. jumper settings on ie-78k0-ns jp2 jp3 jp4 jp6 jp7 jp8 short 2-3 1-2 1-2 3-4 5-6 1-2 3.5 switch settings on IE-178018-NS-EM1 set the switch on the IE-178018-NS-EM1 as shown below. table 3-3. switch settings on IE-178018-NS-EM1 switch setting meaning factory setting i side connect the internal ice capacitor for osc power supply s1 (osc) u side connect the capacitor on the target for osc power supply s1 osc 13 ui i side connect the internal ice capacitor for cpu power supply s2 (cpu) u side connect the capacitor on the target for cpu power supply s2 cpu 13 ui on connect a pull-up resistor to p132 to p134 s3 (p13p-up) off do not connect a pull-up resistor to p132 to p134 s3 p13p -up p132 p133 p134 (not used) 1 2 3 4 o f f on connect a pull-up resistor to p60 to p63 s4 (p6p-up) off do not connect a pull-up resistor to p60 to p63 s4 p6p-up p60 p61 p62 p63 1 2 3 4 o f f caution s3-4 is not used. user?s manual u14012ej1v0um00 30 [memo] users manual u14012ej1v0um00 31 chapter 4 differences between target devices and target interface circuits this chapter describes differences between the target devices signal lines and the signal lines of the ie-178018- ns-em1s target interface circuit. although the target device is a cmos circuit, the IE-178018-NS-EM1s target interface circuit consists of an emulation cpu, ttl, cmos-ic, and other components. when the ie system is connected with the target system for debugging, the ie system performs emulation so as to operate as the actual target device would operate in the target system. however, some minor differences exist since the operations are performed via the ie systems emulation. (1) signals input to or output from the emulation cpu and the m pd178p018 (2) signals input to or output from the emulation cpu and the m pd780009 (3) other signals the ie systems circuit is used as follows for signals listed in (1) to (3) above. (1) signals input to or output from the emulation cpu and the m m m m pd178p018 p00 to p06 p10 to p15 p20 to p27 p30 to p37 p120 to p125 p132 to p134 regcpu regosc eo0, eo1 amifc fmifc vcol vcoh (2) signals input to or output from the emulation cpu and the m m m m pd780009 reset x1 p40 to p47 p50 to p57 p60 to p67 (3) other signals userv dd , gnd, x2, v dd port, gndpll, v dd pll, v pp chapter 4 differences between target devices and target interface circuits users manual u14012ej1v0um00 32 figure 4-1. equivalent circuit 1 from emulation circuit p00 to p06 100 w 1 m w p10 to p15 eo0, eo1 cpureg oscreg p20 to p27 p30 to p37 p120 to p125 100 w 1 m w amifc fmifc vcol vcoh 51 w p132 to p134 100 w hks120 39 k w s3 lv cc pd178p018 emulation cpu 0.01 f s1, s2 1000 pf probe side ie system side m m chapter 4 differences between target devices and target interface circuits users manual u14012ej1v0um00 33 figure 4-2. equivalent circuit 2 from emulation circuit x1 100 w reset 100 w 4.7 k w 1 m w p40 to p47 p50 to p57 p64 to p67 100 w 1 m w p60 to p63 100 w 1 m w userv dd 100 w 1 m w 3.3 k w 1.8 k w hks120 hks120 hks120 39 k w lv cc lv cc v cc lv cc pd780009 emulation cpu hc4066 pc393 pc393 0.1 f + + - - s4 gnd, gndport v dd port, gndpll, v dd pll, v pp , x2 nc m m m m probe side ie system side users manual u14012ej1v0um00 34 [memo] users manual u14012ej1v0um00 35 appendix emulation probe pin assignment table table a-1. np-80gc/gc-tq pin assignments (1/2) emulation probe cn5 pin no. emulation probe cn5 pin no. 1 114 35 50 2 113 36 45 3 108 37 46 4 107 38 41 5 104 39 42 6 103 40 35 7 100 41 8 899427 9944314 10 93 44 13 11 30 45 18 12 29 46 17 13 24 47 22 14 23 48 21 15 20 49 28 16 19 50 27 17 16 51 92 18 15 52 91 19 10 53 98 20 9 54 97 21 37 55 102 22 43 56 101 23 44 57 106 24 47 58 105 25 48 59 112 26 51 60 111 27 52 61 83 28 57 62 77 29 58 63 78 30 59 64 73 31 60 65 74 32 55 66 69 33 56 67 70 34 49 68 63 remarks 1. the np-80gc/gc-tq are products of naitou densei machidaseisakusho co., ltd. 2. the numbers in the emulation probe column indicate the corresponding pin number on the emulation probe tip. appendix emulation probe pin assignment table users manual u14012ej1v0um00 36 table a-1. np-80gc/gc-tq pin assignments (2/2) emulation probe cn5 pin no. emulation probe cn5 pin no. 69 64 75 72 70 61 76 75 71 62 77 76 72 65 78 79 73 66 79 80 74 71 80 85 remarks 1. the np-80gc/gc-tq are products of naitou densei machidaseisakusho co., ltd. 2. the numbers in the emulation probe column indicate the corresponding pin number on the emulation probe tip. users manual u14012ej1v0um00 37 [memo] users manual u14012ej1v0um00 38 [memo] although nec has taken all possible steps to ensure that the documentation supplied to our customers is complete, bug free and up-to-date, we readily accept that errors may occur. despite all the care and precautions we've taken, you may encounter problems in the documentation. please complete this form whenever you'd like to report errors or suggest improvements to us. hong kong, philippines, oceania nec electronics hong kong ltd. fax: +852-2886-9022/9044 korea nec electronics hong kong ltd. seoul branch fax: 02-528-4411 taiwan nec electronics taiwan ltd. fax: 02-2719-5951 address north america nec electronics inc. corporate communications dept. fax: 1-800-729-9288 1-408-588-6130 europe nec electronics (europe) gmbh technical documentation dept. fax: +49-211-6503-274 south america nec do brasil s.a. fax: +55-11-6465-6829 asian nations except philippines nec electronics singapore pte. ltd. fax: +65-250-3583 japan nec semiconductor technical hotline fax: 044-548-7900 i would like to report the following error/make the following suggestion: document title: document number: page number: thank you for your kind support. if possible, please fax the referenced page or drawing. excellent good acceptable poor document rating clarity technical accuracy organization cs 99.1 name company from: tel. fax facsimile message |
Price & Availability of IE-178018-NS-EM1
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |